Cadillac Manifold

[Mike Burkhart - Deceased 1948 - 2016]

Hey guys, I'm looking for a left exhaust manifold for my 1980 Fleetwood 75. It has the 6.0L V-8. Mine is cracked, and need a good one. Anyone have an idea where I could find one? Your help is very much appreciated.

Thanks,
Mike

 

[John ED Renstrom]

should be able to get a new one from rock auto or any other decent parts store walk in or on line.

 

[Paul Steinberg]

RockAuto.com doesn't have it listed, just the exhaust manifold gasket.

 

[Kurt Arends]

Check with Purkey's Auto Salvage in Coffeyville, KS. They might very well have one in the yard.

 

[Kurt Arends]

There is also the big Cadillac-only salvage yard on the east side of Oklahoma City. Can't recall the name, but try Google.

 

[Kurt Arends]

The name of the Cadillac-Lincoln only yard in Oklahoma City is Aabar's Cadillac and Lincoln Salvage, 9700 N.E. 23rd St., Oklahoma City, OK 73141. Phone number is 405.769.3318.

 

[Mike Burkhart - Deceased 1948 - 2016]

No luck with those places.

Anyone else have any other ideas? Your help is appreciated!

 

[Herb John]

If you have a local salvage yard, they use to have a parts hotline to all the other salvage's. They just " squak" what they want and if someone has one they just ship it to them.

 

[Mike Burkhart - Deceased 1948 - 2016]

Herb,
I'm familiar with that. I have already tried that, too. No luck.........
Thanks

 

[Attila Bethlenfalvy]

As an almost last resort (from a price standpoint), call Cadillac Heaven. They'll have it.

http://www.cadillacheaven.com/

 

[Mike Burkhart - Deceased 1948 - 2016]

Atti,
They do have one. I just got a lead on another one, if it pans out.
Thanks to you, I at least found one. I was hoping you would chime in on this one!
Thanks,
Mike

 

[John ED Renstrom]

don't forget to shave it before putting it back on.

 

[Kurt Arends]

Louie Watts at Watts Auto Salvage in Wymore, NE has several '80/'81 Cadillacs as well. Same engine as I recall with the exception of the 8/6/4 B.S.

 

[Peter Grave - Deceased - 1938 - 2022]

A second to EDs advise get it Planed before you install it and tighten bolts from center out alternating sides check torque specs in shop or motor manual. This will save cracking new one.