James Fischer
PCS Member
Took the 70 Rescuer to PCS member John Arrington's shop (Emergency Vehicles Inc) last week to get a on-going electrical issue addressed and get a Federal siren mounted.
I would like to ask the experts here on the board if anyone has had any similar issues and what may be the problem.
Upon starting the ambulance all electricals work fine,however once the brake is applied everything cuts out EXCEPT the turn indicators.
All interior lights,brake lights,tail lights,emergency lights and motorola radio go
DEAD.
The strange thing is that it does not always do this.....but when it does it starts when the brakes are applied.
As John said all SUPERIORS seem to be wired just a bit differently and he WILL NOT re-wire the entire ambulance.
John is asking if anyone that may be familier with this type of problem to please contact him directly at 209-992-7236.
There is no use installing the siren until this issue is cleared up,so any and all ideas,suggestions or help would be very much appreciated.
Thanks to everyone in advance in getting the 70 back to her usual self !!
I would like to ask the experts here on the board if anyone has had any similar issues and what may be the problem.
Upon starting the ambulance all electricals work fine,however once the brake is applied everything cuts out EXCEPT the turn indicators.
All interior lights,brake lights,tail lights,emergency lights and motorola radio go
DEAD.
The strange thing is that it does not always do this.....but when it does it starts when the brakes are applied.
As John said all SUPERIORS seem to be wired just a bit differently and he WILL NOT re-wire the entire ambulance.
John is asking if anyone that may be familier with this type of problem to please contact him directly at 209-992-7236.
There is no use installing the siren until this issue is cleared up,so any and all ideas,suggestions or help would be very much appreciated.
Thanks to everyone in advance in getting the 70 back to her usual self !!
Last edited: