windshield molding studs

John ED Renstrom

PCS Member
Super Site Supporter
Ok some one wanted these and I diss remember who but I made a promise so if you let me know where to sent them there yours for 5 bucks. had to go to a 60 to get them, the factory molding on a 63 64 caddy are put on different and are a different molding then the CC
 

Attachments

  • IMG_1558.jpg
    IMG_1558.jpg
    50.8 KB · Views: 89
yes that's why I got them. there are 6 of them across and you'll have to compare them with the one you have. but unless the 59 CC used a larger molding on the top then the car they will fit. the glass is the same from 59 to 64 on all cars using commercial glass. I was out there looking for a fin molding for a 58 and radiator support for a 69. found them to but not enough time to get them off. right now so I snagged these quick before I left. they go on the opposite of what you think ,the angle is almost flat with the roof. instead of pushing them down you kind of slide them back till the molding falls in place. use a lot of sealer around the holes as it goes right inside. PM me were to sent them and get them to you
 
Back
Top