Jean-Marc Dugas
PCS Member
I have been meaning to adjust the headlights on the 67 since I got it, so 2 years later, I finally got to it.
Of course, 3 out of 4 were cooperating really well except for the dim (upper) one on the driver side.
The adjustment screw for the up / down settings is not working properly. I removed both the driver side and passenger side headlights to see if I could note something different in the set-up and found that there seems to be something missing behind the screw.
I did not take the whole assembly apart to investigate closer, but what seems to be missing may be a spring and a retaining nut, I'm not sure.
Does anyone have a diagram of the assembly? I have looked for one, but can not find one.
Thanks,
Of course, 3 out of 4 were cooperating really well except for the dim (upper) one on the driver side.
The adjustment screw for the up / down settings is not working properly. I removed both the driver side and passenger side headlights to see if I could note something different in the set-up and found that there seems to be something missing behind the screw.
I did not take the whole assembly apart to investigate closer, but what seems to be missing may be a spring and a retaining nut, I'm not sure.
Does anyone have a diagram of the assembly? I have looked for one, but can not find one.
Thanks,