View Single Post
Old 06-29-2017, 10:20 AM
John ED Renstrom's Avatar
John ED Renstrom John ED Renstrom is offline
PCS Member - Elected Director 2017-2020
Join Date: Mar 2009
Location: Hot Springs SD 57747
Posts: 11,095
Thanks: 3,922
Thanked 14,362 Times in 6,064 Posts
Groans: 2
Groaned at 3 Times in 3 Posts

If nothing else it just cleans up the car. Now if you change the battery switch. Move the charge wire from the alternator to the wire out that way it will charge the battery in Either position. The same for that fused wire. eBay has a lot of sellers that will but ends on fore you and sell cable by the foot. You should not have a need for anything bigger then a #2 wire for the positive and ground. The ground wire should go from the terminal to the frame on the out side. You may have to flip on of the batteries to do that. The a ground cable from the engine to the frame.

My guess is going from the rust belt. As the rust built up things got moved. A neater routing of cables and wire not only looks better it works better.
drop in for coffee anytime
Reply With Quote
The Following User Says Thank You to John ED Renstrom For This Useful Post:
Richard Vyse (06-29-2017)