we went out to do ine simple thing yesterday. change the glove box lock on the pinner. the button was missing so we needed a new one. the switch is pretty sloppy so found a set for a two door and have the locks the switch and glove box all keyed alike. put the glove box in as it is hanging open. but discovered that the catch is missing. I would thing it is just a wire but I have don't have a idea. my attempts to manufacture one came up with one nothing, the other get it close but it will not latch properly so it can't release. no amount of bending or adjust would let it open.
so we need to at least get a picture of one of locate one in a yard some were.
here was my attempts.
so we need to at least get a picture of one of locate one in a yard some were.
here was my attempts.