View Single Post
  #2  
Old 05-07-2015, 07:45 PM
Paul Steinberg Paul Steinberg is offline
PCS Past President / Senior Website Administrator
 
Join Date: Mar 2009
Location: Woodstock CT 06281
Posts: 6,181
Thanks: 6,389
Thanked 11,408 Times in 3,729 Posts
Groans: 0
Groaned at 9 Times in 9 Posts
Default

There are no mounting gaskets, but you can purchase rubber washers and put them between the mount and the roof. The wires that are showing in that picture are for the light and the brake. You need a minimum of a 6 gauge stranded machine tool class K wire for the siren itself. This is an extremely fine stranded (266 strands in the bundle)(class K) wire, that is both easy to work with, and will give you the best electrical conductivity. The least that I would consider is 133 strand class H 6 gauge wire. This should be available from local electrical supply houses in larger cities where there is manufacturing. The other alternative is to go to www.delcity.net and order 25 feet of 6 gauge red or black battery cable wire.
__________________
"When a man opens a door for his wife, it's either a new car or a new wife."
Reply With Quote
The Following User Says Thank You to Paul Steinberg For This Useful Post:
Bill Marcy (05-07-2015)