Friends of the Professional Car Society - Official Website of the Professional Car Society, Inc.

Friends of the Professional Car Society - Official Website of the Professional Car Society, Inc. (http://www.professionalcarsociety.org/forums/index.php)
-   Wanted (http://www.professionalcarsociety.org/forums/forumdisplay.php?f=50)
-   -   WANTED Mocom radio/speaker mounting bracket (http://www.professionalcarsociety.org/forums/showthread.php?t=22140)

Mark Jordan 04-28-2019 02:38 PM

WANTED Mocom radio/speaker mounting bracket
 
Does anyone have a Motorola mounting bracket for a Mocom radio head? The width is 5". I have found some adjustable CB radio mounts that come close but would prefer a Motorola original. Any suggestions? Thanks.

John ED Renstrom 04-28-2019 10:22 PM

mine went to the west coast. if you have a picture I can check my stash got about 10 mounts around here

John ED Renstrom 05-01-2019 01:01 PM

2 Attachment(s)
are any of these what you looking for I think there is one or the steel ones in there a a few plastic

Mark Jordan 05-02-2019 09:40 PM

Not from what I can see. Thanks for looking for me, But I think I found one on e-Bay. Only cost 6.00 and should arrive in a couple more days. Then I will know for sure. Thanks again!

John ED Renstrom 05-03-2019 10:48 AM

This kind of stuff is a case of just keep looking. Nice you found one at a decent price. I could nevef under stand why when they remove the radio they cant just bolt the bracket back on.

Kurt Arends 05-03-2019 11:00 AM

Just watch eBay! That's how I found those that I have.

Walter Suiter 05-03-2019 05:00 PM

Quote:

Originally Posted by John ED Renstrom (Post 841931702)
This kind of stuff is a case of just keep looking. Nice you found one at a decent price. I could nevef under stand why when they remove the radio they cant just bolt the bracket back on.

Because the radio comesout, wiring harness, hopefully all of the power cable, speaker, and more hopefully the radio (you don't want to know how many drawers got left in vehicles) bagged & boxed for return to the customer. The brackets get tossed in the bin for Krylon reconditioning.

Unless the customer is smart enough to inventory the box when he gets it, the shop gets to invoice for new brackets ans SCREWS when the radio goes in the next vehicle. A key part of this process is returning the box to customer custody. Radio shops already have tons of old radios filling balconies to the degree collapse of balconies is a recognized hazard on Fire Department response plans.

Mark Jordan 05-14-2019 09:14 AM

The one I got turned out to be 1/4 inch too small. Will keep looking. Thanks, again. Needs to have I.D. of 5 1/8" and angled forward. Wish people on eBay would post a pic with a tape measure or give the dimensions.

John ED Renstrom 05-14-2019 09:19 AM

How true but if you could. then those of us that have a stash might be able to marry it up.


All times are GMT -4. The time now is 02:14 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.