PDA

View Full Version : 1969 Rear Bumper Parts


Paul Steinberg
08-07-2017, 11:02 PM
Looking for the rubber and metal part shown in the bumper end in this picture...

Kurt Arends
08-07-2017, 11:09 PM
What did you do with the one you had??

John ED Renstrom
08-08-2017, 11:29 AM
simple enough to make all it is, is the stop. as I recall the 69 fit tight up agent the base of the light. and this kept it from rattling. the metal tab is or should be welded in place

Kurt Arends
08-08-2017, 08:37 PM
Is it safe to assume that these would have been the same as those on the rear bumper ends on all '69 Cadillacs? If so, they cannot be that hard to find.

John ED Renstrom
08-08-2017, 10:45 PM
I'm thinking the only difference in the pro car and the standard Caddy was the long bolt and energy shock. as I recall that was missing on the 69 with no holes in the body for it. got one in there we don't need and I thing my assistants day of helping may be over.

John ED Renstrom
08-08-2017, 10:48 PM
here is the one I meant to put up