PDA

View Full Version : Need a model 14 motor


Kevin Lynch
09-06-2016, 06:32 PM
I've created a replica patrol car out of a 1970 Chevy Bel Air. It was at the request of the sheriff that I raise the money, get a car, and do the work. I'm almost done. Today we were putting the roof bar on and realized that one of the 14's needs a motor to run the chain. I have 3 other 14s and the motors were too big. I'm told this motor was made for this particular purpose. Any suggestions or help of any kind would be appreciated!
Thanks
Kevin
www.ThisOldFireTruck.com

Steve Loftin
09-06-2016, 09:58 PM
Sounds like you need a #11 motor.

John ED Renstrom
09-06-2016, 10:27 PM
that would be the one on the visibar. one powered one following with the rotation 180 out

Russell Street
09-07-2016, 08:53 AM
Kevin, Steve is right you need a Model 11 motor. If memory serves me correctly, the Model 12's Twinsonics used the same motor/drive set-up.

I checked Cahill's web site, he doesn't list them but it's a pretty fair bet he can scare one up.....440-452-3482, ask for Gary.

Happy huntin'....Russ

Steve Lichtman
09-07-2016, 12:04 PM
Kevin, if that doesn't work, I am working on putting together parts from two bad Twinsonics to make one good one. If the motor from the other still works, it will be available soon. Email me in a week or two and remind me.

Kevin Lynch
09-07-2016, 08:31 PM
Thanks for all the very helpful advice!!!
Kev

Russell Street
09-15-2016, 11:25 AM
Kevin...you still need this motor??? Brad and I are going down to Cahill's place Friday, I'll happily check for you.

Russell Street
09-16-2016, 02:16 PM
Good News...Bad News!!!!! He's got 'em, would have to locate them!! If you've ever seen his place, that statement makes perfect sense>

My thinking was correct, same motor for both Model 11 & 12's.