View Full Version : Base for Federal double tone siren

Denny Shira
08-16-2013, 05:47 PM
I have acquired a federal double tone siren.It works well,but is missing a base.I want to use it under hood so a flat mount is preferred.Also,i need a federal service manual or bulletin for this siren if any one has one available.

The rotor housing is slightly loose from the motor,and i need to remove the rotor so i can tighten it. Any help would be greatly appreciated,Thanks!:confused:

Jack Ramsey
08-16-2013, 07:53 PM
Left-hand threads! Two hex (Allen) set-screws on shaft!
http://i458.photobucket.com/albums/qq304/fyrboy1/Federal%20Class%2070/6_zps16b790f7.jpg (http://s458.photobucket.com/user/fyrboy1/media/Federal%20Class%2070/6_zps16b790f7.jpg.html)
http://i458.photobucket.com/albums/qq304/fyrboy1/Federal%20Class%2070/4_zps599b4a41.jpg (http://s458.photobucket.com/user/fyrboy1/media/Federal%20Class%2070/4_zps599b4a41.jpg.html)

Terry Lange
08-17-2013, 02:36 PM
Denny, this might be of help, assuming it's the correct model number.